Locally configure Citrix PNAgent in image 6.5.x |
Objectives
This document explains how to locally configure Citrix Program Neighborhood Agent (PNAgent) in image 6.5.x.
... |
Mar 8, 2007 - http://www.chippc.com/?kb=610 |
|
How to Reset to Factory Defaults in image 6.0 |
Objectives
In some cases it may be requiered to reset a device to it|s factory defaults.
This article provides information on how to ... |
Mar 8, 2007 - http://www.chippc.com/?kb=73 |
|
Locally install Xtreme Plug-ins using a network share in image 6.0 |
Objectives
This document explains how to locally install Xtreme plug-ins on a device with image 6.0 using a Network Share.
... |
Mar 8, 2007 - http://www.chippc.com/?kb=602 |
|
How to create an ICA Connection via Xcalibur Global |
Objectives
This document teaches how to use Xcalibur Global to create an ICA connection on the client device.
The ICA plug-in enable... |
Mar 8, 2007 - http://www.chippc.com/?kb=42 |
|
Upgrade or restore local Firmware using a USB storage device in image 6.5.x |
Objectives
This document explains how to restore/upgrade the local firmware of a Jack PC or EX device with image 6.5.x using a USB storage ... |
Mar 8, 2007 - http://www.chippc.com/?kb=584 |
|
Compatibility of External SCM-USB-Smart-Card Readers and Chip PC Thin Clients by Firmware Version |
Objectives
The following table maps the compatibility of the various External SCM Smart Card readers with Chip PC thin clients according to... |
Mar 8, 2007 - http://www.chippc.com/?kb=574 |
|
VGA and USB connectors compatibility to Jack PC |
Objectives
If you can’t insert your VGA / USB connector to the Jack PC, you are probably using a device that does not comply with the ... |
Mar 8, 2007 - http://www.chippc.com/?kb=627 |
|
How to Modify the Display Resolution on a Local Device |
Objectives
This document teaches how to modify the display resolution on a local device
The method taught is... |
Mar 18, 2007 - http://www.chippc.com/?kb=717 |
|
How to Install the VNC Plug-in via Xcalibur Global |
Objectives
This document teaches how to use Xcalibur Global to install the VNC plug-in on a client device.
The method taught is base... |
Mar 8, 2007 - http://www.chippc.com/?kb=34 |
|
Device Configuration Using Custom DHCP Options - Image 6.0 |
Objectives
It is possible to control and automatically configure several settings of a Xtreme PC device using custom DHCP server options.... |
Mar 8, 2007 - http://www.chippc.com/?kb=94 |
|