| How to Use Xcalibur Global to Install the TouchKit Plug-in onto TC|s |
| 1 Objectives
This document explains how to use Xcalibur Global to install the TouchKit plug-in onto TCs.
This procedure is ba... |
| Jun 26, 2007 - http://www.chippc.com/?kb=739 |
|
| Access and use wireless support in image 6.5.x |
| Objectives
A wireless USB NIC is supported in image 6.5.3 and later. This document explains how to access this feature and how to use and c... |
| May 1, 2007 - http://www.chippc.com/?kb=587 |
|
| Configure the RDP / ICA connections to run on startup on image 6.5.x |
| Objectives
This document explains how to configure the RDP / ICA connections to run on startup on image 6.5.x, both locally and through Xca... |
| Mar 8, 2007 - http://www.chippc.com/?kb=576 |
|
| Enable Seamless Window in an ICA session in image 6.5.x |
| Objectives
This document explains how to enable seamless window mode in an ICA session on the client side in image 6.5.x.
... |
| Mar 8, 2007 - http://www.chippc.com/?kb=592 |
|
| Understanding the Terminal Server Session Directory |
|
| Mar 8, 2007 - http://www.chippc.com/?kb=555 |
|
| What is Citrix GINA? |
| Objectives
|
| Mar 8, 2007 - http://www.chippc.com/?kb=539 |
|
| Using the Smart Card Logon Plug-in |
|
The objective of this document is to provide the technical knowledge and understanding that is required to correctly and effectively use the Smartcard Logon plug-in on Chip PC thin clients.
|
| Mar 27, 2007 - http://www.chippc.com/?kb=723 |
|
| How to Reset a Client Device to Factory Defaults via Xcalibur Global |
| A How-To Movie is a short visual presentation of how to perform specific tasks on either Xcalibur Global or Thin-Client Device.
This movie teaches How to Reset a Client Device to Fact... |
| Mar 8, 2007 - http://www.chippc.com/?kb=695 |
|
| Add a non-standard printer |
| Objectives
This document explains how to locally add non-standard printers, both parallel and USB.
... |
| Mar 8, 2007 - http://www.chippc.com/?kb=70 |
|
| How to Create an RDP Connection via Xcalibur Global |
| Objectives
This document teaches how to use Xcalibur Global to create an RDP connection on the Client Device.
The method taught is b... |
| Mar 8, 2007 - http://www.chippc.com/?kb=40 |
|
Login
| Partners | Contact 
