How to Enable a USB Printer on the Client Device |
A How-To Movie is a short visual presentation of how to perform specific tasks on either Xcalibur Global or Thin-Client Device.
This movie teaches How to Enable a USB Printer on the C... |
Mar 8, 2007 - http://www.chippc.com/?kb=670 |
|
Enable local USB storage devices in image 6 |
Objectives
This document explains how to enable and use local USB storage devices, such as Disk on Key, CD ROM and Floppy.
... |
Mar 8, 2007 - http://www.chippc.com/?kb=618 |
|
Locally configure USB devices in image 6.5.x |
Objectives
The USB Devices tab is dedicated for USB devices management, allowing administrators to define general device behavior regarding... |
Mar 8, 2007 - http://www.chippc.com/?kb=594 |
|
How to Password Protect the Device Settings on the Client Device |
Objectives
This document will teach you how to set a password to protect the client device settings.
The method taught will be base... |
Mar 8, 2007 - http://www.chippc.com/?kb=53 |
|
Terminal Services Licensing |
SYMPTOM
When using the temporary terminal services or when there are problems with the licensing, the devices will not connect to the server... |
Mar 8, 2007 - http://www.chippc.com/?kb=114 |
|
Advanced Web-Based Administration Settings |
Objectives
By default the" Web-based Administration" is enabled on all Xtreme PC devices.
This article describes the method... |
Mar 8, 2007 - http://www.chippc.com/?kb=97 |
|
Access and use hot keys and key mapping options in image 6 |
Objectives
This document explains how to access and use hot keys and key mapping options in image 6.5.x, both in the local device|s desktop ... |
Mar 8, 2007 - http://www.chippc.com/?kb=616 |
|
Locally install Xtreme Plug-ins in image 6.5.x - FTP |
Objectives
This document provides a step-by-step description of local Xtreme Plug-ins installation in image 6.5.x via FTP ser... |
Mar 8, 2007 - http://www.chippc.com/?kb=597 |
|
Xcalibur XP Setup Prerequisites |
Objectives
A successful installation of Xcalibur XP server requires that additional components are installed on the Host computer prior to i... |
Mar 8, 2007 - http://www.chippc.com/?kb=103 |
|
Use Script for assigning NetBIOS names to ChipPC devices using Xcalibur Global |
SCOPE
This document explains How to automatically assign NetBIOS names to a large number of Thin Client devices using Xcalibur Global.... |
Mar 8, 2007 - http://www.chippc.com/?kb=606 |
|