Access the Xcalibur Global System container |
Objectives
The System container centralizes Xcalibur Policy management tools. This document explains how to access it.
... |
Mar 8, 2007 - http://www.chippc.com/?kb=590 |
|
How To Perform XPI Installation Remotely using Xcalibur XP |
Objectives
XPIs are software add-ons that can be installed on Xtreme PC devices in order to enhance the device capabilities. The following a... |
Mar 8, 2007 - http://www.chippc.com/?kb=128 |
|
Configure the SNTP Client Plug-in in image 6.0 |
Objectives
This article describes the capabilities provided by the SNTP Plug-in, which is necessary to configure the local Xtreme PC clock i... |
Mar 8, 2007 - http://www.chippc.com/?kb=80 |
|
How to Create an ICA Connection with Support for USB Storage via Xcalibur Global |
Objectives
This document teaches how to use Xcalibur Global to create an ICA connection with support for USB storage on the client device.... |
Mar 8, 2007 - http://www.chippc.com/?kb=44 |
|
How to Create an ICA Connection to a Published Application from the Client Device |
Objectives
This document teaches how to create an ICA connection to a published application from the client device.
The ICA plug-in... |
Mar 8, 2007 - http://www.chippc.com/?kb=45 |
|
How to Use Xcalibur Global to Configure External Storage Security |
Objectives
This document teaches how to use Xcalibur Global to configure external storage security.
The method taught is based on th... |
Mar 26, 2007 - http://www.chippc.com/?kb=721 |
|
How to Use Xcalibur Global to Set Host Entries |
Objectives:
This document teaches how to use Xcalibur Global to set Host Entries.
The method taught is based on the following steps... |
Mar 27, 2007 - http://www.chippc.com/?kb=724 |
|
How to Create an RDP Connection with an LPR Printer via Xcalibur Global |
1. Objectives
This document explains how to use Xcalibur Global to create an RDP connection with an LPR printer. When a session is opened us... |
Nov 14, 2007 - http://www.chippc.com/?kb=745 |
|
How to Use Xcalibur Global to Preserve Local Settings During an Upgrade |
Objectives
This document teaches how to use Xcalibur Global to preserve local settings during an upgrade.
The method taught is based... |
Mar 26, 2007 - http://www.chippc.com/?kb=720 |
|
How to Create a New IP Scope in Xcalibur Global |
1 Objectives
This document explains how to create a new IP scope in Xcalibur Global.
... |
Jun 24, 2007 - http://www.chippc.com/?kb=737 |
|