Last modified:	Thursday, Mar 8, 2007	Article ID:	569
Related products:	Xcalibur XP Management Software

---

Objectives

This is a description of the communication process between the Thin Clients and Xcalibur 3.x management server:

1. The device boots up and sends an SNMP boot Trap (UDP) to the Xcalibur server using source port ANY, destination port 162 (UDP).
2. The Xcalibur server sends to the client an SNMP Get command using UDP from source port ANY, destination port 161.
3. The client responses to the servers using SNMP Response (UDP) source port 161, destination port ANY.

Procedures

This is the configuration that must be defined on the Firewall/Router in order to enable communication between the Xcalibur server and the Thin Clients:

FROM	Source Port	TO	Destination Port	Protocol	Service	General
Client	Any	Xcalibur	162	UDP	SNMP	Trap
Xcalibur	Any	Client	161	UDP	SNMP	Get
Client	161	Xcalibur	Any	UDP	SNMP	Response
Xcalibur/Client		Client/Xcalibur		ICMP		PING - bidirectional